Three, four or five years? How the length of a managed print agreement affects price, flexibility and refresh plus the notice, renewal and mid term rules to understand before you sign.
Get a Quote
Call Now
READING TIME
8 minutes
WRITTEN FOR
Finance directors and office managers
COVERAGE
UK businesses of all sizes
LAST REVIEWED
September 2026
36 to 60
Months, the usual range for a UK managed print term
2 clocks
Lease and service agreements can end on different dates
1 deadline
The notice date matters more than the end date
Yearly
How often many agreements allow a price review
The length of a managed print agreement shapes almost everything that follows: the monthly price, how easily you can change the fleet, when the equipment is refreshed and how much notice you must give to leave. Yet the term is often the one detail nobody questions when the quote arrives.
Most UK business print agreements run for somewhere between three and five years. This guide explains the terms you are most likely to be offered, what each one means in practice, how notice and automatic renewal work and what you can reasonably expect to change during the life of the contract. It is general guidance rather than legal advice.
Why contract length matters more than it first appears
A print agreement is a commitment to pay for equipment and service over a fixed period. The longer that period, the lower the monthly equipment charge tends to be, because the cost of the hardware is spread across more payments. The trade off is flexibility. A five year term that looked sensible for a 40 person office can feel restrictive if the business moves to hybrid working in year two and needs half the devices.
The term also sets the rhythm of technology refresh. Devices last well, yet firmware support, security features and cloud connectivity move on. Choosing a length is therefore a balance between cost, certainty and the pace of change you expect.
The common terms and how they compare
Providers typically quote 36, 48 or 60 months. Shorter rental arrangements and rolling service agreements exist too, usually at a higher monthly cost or for lower value equipment. The table below sets out the general pattern rather than any specific price.
TERM MONTHLY EQUIPMENT CHARGE FLEXIBILITY TECHNOLOGY REFRESH OFTEN SUITS
12 months or rolling Highest per month Greatest, with short notice to change Whenever you choose Start ups, project offices and temporary sites
36 months Higher than longer terms Good, with an earlier exit point Every three years Growing firms and businesses expecting change
48 months Middle ground Moderate Every four years Established offices with steady volumes
60 months Lowest per month Lowest, with the longest commitment Every five years Stable organisations focused on the lowest monthly figure
GENERAL PATTERN OF UK MANAGED PRINT TERM LENGTHS. ACTUAL PRICING DEPENDS ON EQUIPMENT, VOLUMES AND PROVIDER, SEPTEMBER 2026.
Notice that the service element of a managed print agreement, meaning the cost per page for toner, parts and labour, is usually quoted separately from the equipment charge. That per page price does not necessarily fall with a longer term. What changes most is the cost of the hardware spread across the months.
Because equipment cost is spread over the term, stretching from three to five years can make a noticeable difference to the monthly equipment line. The graph shows how that relationship typically looks for the same device on different terms, expressed as an index rather than a price.
Monthly equipment charge by term length for the same device
Index where a 36 month term equals 100. Illustrative only, not a quotation or market average.
The saving per month on a longer term is real but it comes with a larger total commitment. Compare total cost over each term, not the monthly line. A lower monthly charge over 60 months can add up to more than a slightly higher one over 36 months, particularly if you would want new equipment before the longer term ends.
Many print deals are made up of two separate contracts. The equipment is often funded by a lease with a finance company, known as the funder, while the service and supplies sit in a separate agreement with the print provider. Each has its own start date, its own term and its own notice clause. They may not end on the same day.
This matters because giving notice to the print provider does not automatically end the lease with the funder. The reverse is also true. If the service agreement ends but the lease continues, you can find yourself paying rental on equipment that nobody is maintaining. Before signing, ask whether there are one or two agreements, who each is with and whether their terms are aligned. Some providers offer a single all inclusive agreement with one clock rather than two.
CopyBox Document Systems sets out the term, notice period, review points and what happens at the end of the agreement in plain English before anything is signed. We start with a review of what you actually print so the fleet and the contract both fit the way your business works.
The single most important date in a print agreement is not the end date. It is the last day on which you can give notice. Many business agreements continue automatically if notice is not received within a set window before the term expires. Miss it and the contract may roll on for a further period, sometimes for a year at a time.
Check the notice window. Some agreements require notice a fixed number of days before the end date. Others require it within a window that opens and closes at set points.
Check the method. Notice usually has to be in writing and sometimes to a specific address. An email to your account manager may not count.
Check who to notify. Where a funder is involved, both the funder and the service provider may need separate notice.
Ask for acknowledgement. Request written confirmation that notice has been received and keep it with the contract.
Diary the dates. Put the notice deadline, not only the end date, into a shared calendar with reminders several months ahead.
Automatic renewal keeps service running if nobody decides. The problem comes when a business does not know it exists. Consumer rules on subscriptions generally do not protect businesses in the same way, so the wording of your own contract is what counts.
Secondary rental explained
When a lease reaches the end of its primary period, it often moves into a secondary period rather than stopping. During secondary rental you continue to use the equipment and pay the funder, sometimes at a reduced rate and sometimes at the same rate, until notice is given. Terms vary widely between funders, so find out in advance how the secondary rental is charged, how long each secondary period lasts and how to end it.
Secondary rental can be useful if the equipment is reliable. It should still be a deliberate choice rather than the result of a missed notice date.
What can change during the term
A good managed print agreement is not frozen on day one. Businesses change and most providers expect some adjustment over three to five years. What matters is how those changes are handled and priced.
Adding devices. New equipment for a new team or site is often added on a separate schedule that may have its own end date. Ask whether it can be co terminated with the main agreement.
Removing devices. Taking equipment out mid term usually still leaves the rental payable unless the agreement allows for it. Check before you downsize.
Office moves. Relocating equipment may carry a charge for disconnection, transport and reinstallation.
Volume changes. If printing falls well below a minimum volume, you may still pay for the minimum. If it rises, excess page charges apply.
Mid term upgrades. An upgrade can be sensible, though be careful with offers that settle the old agreement by folding its balance into a new and longer one.
Coming to the end of a term is often the right moment to review your options. Our guide on How to switch managed print providers sets out a practical plan covering notice, settlement, audits and a smooth cutover between suppliers.
Price reviews during the term
Many agreements allow the provider to review cost per page charges at set points, commonly once a year. Some link increases to an inflation index such as RPI or CPI, some use a fixed percentage and some leave it open. An open ended clause gives you the least certainty. Ask how and when prices can change, whether equipment rental is fixed for the full term and whether there is a cap on any increase. The answers make a longer term easier to budget for.
CONTRACT DATE WHAT TO CHECK WHO TO ASK
Start date When billing begins and when the first meter reading is taken Print provider
Annual review Whether page charges can rise and by how much Print provider
Notice deadline The last day written notice can be given Provider and funder
End of primary period What happens next: return, secondary rental or renewal Funder
Collection Who arranges removal and the certified data wipe Print provider
KEY DATES TO RECORD FOR ANY MANAGED PRINT AGREEMENT.
Choosing the right length for your business
How settled is your headcount? If numbers could change sharply, a shorter term or strong flexibility clauses are worth paying a little more for.
Is an office move likely? Align the term with your property lease where possible.
How important is the latest technology? Firms with strict security or cloud plans may prefer a three year refresh.
How is the business funded? Finance teams focused on the lowest monthly outgoing may favour longer terms, while those focused on flexibility may not.
What are the exit terms? A longer term with fair early exit terms can be better than a shorter one with harsh ones.
If you would like a straightforward explanation of the options before you commit, our Managed Print Services page explains how CopyBox Document Systems reviews your print usage, recommends equipment and sets out term lengths, notice and review points clearly in writing.
For more plain English help with pricing, contracts, security and sustainability, the MPS Help collection brings all of our general managed print guides together in one place.
Contract lengths, common questions
How long is a typical managed print contract?
Is a longer contract always cheaper?
What happens if I miss the notice deadline?
Can I end a managed print contract early?
Can I add or remove devices during the term?
MORE FROM MPS HELP
PRICING
How managed print pricing and cost per page work
READ GUIDE
BUDGETING
Predictable monthly costs: how MPS simplifies budgeting
READ GUIDE
LEASING
The difference between device leasing and managed print
READ GUIDE
PART OF THE GUIDE COLLECTION
MPS Help
This article is part of our general managed print library, written for UK businesses that want clear answers on contracts, costs, service and security before they commit.
Browse the full hub
Every guide in the MPS Help collection is written for office managers, finance teams and IT leads, so you can find the topic you need quickly.
Getting the term right at the start saves money and stress at the end. To talk through contract options for your office, visit our Managed Print Services page or call the CopyBox team in Bedford.